【Back Home】  【简体中文】   【繁体中文】  
Functional fabrics
【Home】  【About Us】  【Products】  【News Center】  【Functional Fabric】  【Textile testing】  【Contact Us】 

Functional Fabric Series

Teflon Fabric Series 1/2
UV-Cut Fabric Series 1/2
Lamination Fabric Series 1/2
Moisture Wicking Fabrics 1/2
Fire Retardant Fabrics 1/2
Germ Resistant Fabric and Deodorization Fabric
Printing fabric products Series
Oxford Fabric Series
Jacquard fabric production Series
Ski suit fabric Series
Winter clothes functional fabric
Golf Clothing Fabric Series 1/2
Anti-Mite-Fabrics 1/2
Cool-Fabrics / Hot-Fabrics

Textile Fabric Test

Fabric Abrasion Resistance Test
Fabric Water Repellency Test
Water Vapor Permeability Test
Textile Tensile strength Test and Textile Tear strength test
Color Fastness to Washing Test
Fabric Water Pressure Test

Textile Testing Standards:

         Home > Textile Testing > Water Vapor Permeability Testing:  

Abrasion Resistance Testing | Water Repellency Testing | Water Vapor Permeability Testing
Tensile Strength Testing | Color Fastness to Washing Testing | Water Pressure Testing
Permeability testing of textiles and textile testing breathable
Permeability testing of textiles

The ability of the fabric of the air through the fabric of great significance. The need to wind season fabric insulation jacket, Should have a smaller permeability. Summer fabric air permeability should be good to get a sense of cool. For a Some special-purpose fabrics, such as parachutes, sails, and spacesuits use fabrics such as coating, there is a specific air permeability Requirements.

1, testing the principle of Under the required pressure difference, measured per unit time of the vertical air flow through the sample, projected through the fabric Gas.
The experimental determination of the flow through the aperture of the pressure on both sides, look-up table to be gas-permeable fabric. When the flow of holes A certain diameter, the greater the pressure, flow per unit time the greater the air; aperture size when the flow at the same time, the same pressure difference corresponding to different air flow, flow, the greater the aperture, the same pressure difference by corresponds to the greater air flow. In order to adapt to the different determination of permeability of fabric, with a flow aperture of different sizes for use.
Permeability testing of textiles and textile testing breathable
2, sample
Test an area of 20cm2. Check the CD sample size should be larger than 20cm2, large sample test can also be used with the - the different parts of the samples tested at least 10 times.
Sample humidity and air permeability of the determination of the three standards required under the atmosphere, the standard two-level arbitration atmospheric testing.

3, the test steps
YG461-type fabric in the volume of test air pressure as shown.
"Textile fabric permeability determination," the provisions of the Determination of fabric air permeability method. "Textile fabric permeability determination" applies to a wide range of textile fabrics, including industrial fabrics, non-woven fabric and other textile products can be breathable.

Applicable standards
GB / T 5453-1997 "Determination of air permeability of textile fabrics"; JIS L1096A, etc.

Breathable textile testing

1, testing the principle of
A certain temperature, so that one side of the sample of the saturated vapor pressure constant, the other side to keep dry, water vapor into the dry side through the sample, by measuring the water vapor permeability of glass per unit time calculated test weight change kind of parameters such as water vapor permeability.

2, the main features of
before the test, just to warm-up time, test temperature test parameters such as type, and the remaining process will be completed automatically after the test, and gives test results and test report.
through computer processing, could be to classify the test sample, classification storage; when testing data on the history of inquiries to receive a history of certain types of samples, data, dynamic analysis to achieve a comprehensive analysis of the production process.
using a standard system weight check, convenient and quick.
through the data network transmission technology, the realization of the automatic test data entry, laboratory data sharing; the convenience of the laboratory data, exchange of experiences, a great extent solved the problem of laboratory data management, to achieve a paperless office to save the economy of expenditure.
Permeability testing of textiles and textile testing breathable
3, Specifications
Measuring range: 0.1 ~ 10,000 g/m2 ? 24h
Test accuracy: 0.01g/m2.24h
System Resolution: 0.0001g
Test temperature: room temperature ~ 50 ℃
Temperature accuracy: ± 0.5 ℃
Test area: 33cm2 × 3
Number of samples: 3
Power: AC 220V 50Hz
Host size: 690 (L) mm × 520 (B) mm × 366 (H) mm
Net Weight: 69kg

4, standard
GB1037, GB/T16928, ASTME96, ASTMD1653, TAPPIT464, ISO2528, DIN53122-1, JIS Z0208

5, the standard configuration
Host, breathable Cup, testing software, communication cable, sampler, calibration weights
Test Report Go
Copyright © 2007 Kunshan City YingJie Textile Import&Export Co.,Ltd. All Rights Reserved